-Used with wood screws or tapping screws for making lightweight attachments (under 50 lbs.) such as cable clips and clamps, outside network interfaces (ONI), protectors, ground blocks, etc.
-For use in concrete, hollow block, solid brick, and wallboard.
-Flange is formed at top end to prevent anchor from sinking in hole during installation in hollow materials.
-Two longitudinal slots are formed on the working end of anchor to allow each half to expand.
-Minimum hole depth is 7/8″.
-The recommended hole diameter is 3/16″.
-Ribs prevent anchor from turning and to prevent pullout.
-Not for use in overhead applications.
-Anchor body is resistant to corrosion from moisture.
-Molded from polypropylene.